Visit Our New Site Click Here!
Harley Parts
Offering the very best prices you will find on Vtwin, Drag spec, Parts Unlimited, DNA, Mid USA and RC components and we can even help with HD OEM parts. Click on the following links to view the catalogs:
|
|
|
|
All parts from the above suppliers arrive direct from the USA allowing us to offer unbeatable value and with parts arriving twice every week we have a great supply line.
Click on the images at the top of this page to go straight to the suppliers online catalogs where you can find part no's and descriptions.
If you have a part no. from one of these suppliers we can tell you if its instock straight away
Here is a small selection of what is available:
Leather lever cover & fringe
Price: €20
Vrod braided brake and clutch hose set
- Front and Rear Braided brake lines with plain or colour cover
- Stainless steel banjos plain or colour
- Clutch line to match the brake line
Oil Drain Trays
- Tired of hot oil running down your oil filter and all over your bike and floor?
- Once the filter has been loosened, these unique drain trays fit underneath the oil filter and against the filter mount to direct the oil into your catch pan – not all over your bike or the floor
Price:
- 99-08 Twin Cam FLHT, FLHR, FLTR and 99-05 FXD €23
- 84-99 Evolution Big Twin €21,71
- L84-03 XL €20
OUTBACK R HD TOOLKIT
Features
- Compact and capable multi-tool specifically for Harley-Davidson motorcycles
- Inside the fold-up handle are three hex keys (5/32", 3/16" and 1/4"), two Torx keys (T25/T27), slotted and Phillips screwdrivers, a socket driver with three sockets (3/8", 7/16" and 1/2"), a 12-point 10mm box wrench for battery terminals, a 9/16" open-end wrench and a spoke wrench
- All are permanently attached, except for the three sockets
- When not in use, tools fold away inside the handle
- Precision-forged from chrome vanadium or carbon steel
- 9-oz. tool measures 3.5" L
RRP €25,85
FOLDING HEX/ TORX® KEY SET
Features
- Combination key set means you carry just one key set for bikes with both hex and Torx® fasteners
- Contains the most commonly used sizes: 5/32", 3/16", 1/4", 5/16", T-25, T-27 and T-40
- Hardened plastic case with rubber insert
- Made in the U.S.A.
RRP €19,86
Available now knuckle Risers and they look amazing.
They are a must for any blacked out bike with attitude
Price €215
These Ace kicker pedals are very very cool indeed and available NOW
Anodised black body and black rubber grip - ask for pricing details:
KAISER & FLAMIN FOOTPEGS
- * Rubber inserts provide comfort and help isolate the foot from vibrations
Flamin €123.60
Sportster Dress Up Kits
- 42-0940 - for 2004-05 XL€1677
- 42-0690 - for 94-03 XL €1313
FACTORY PLUGS FOR YOUR HARLEY
- 32-8909 - 6R12 - for 86 up XL & 99up TC88 €16.63
- 32-8906 - 5R6A - for 84 up 1340 €16.63
- 32-8942 - 10R12A - for 2001 up VRSC €16.63
- * CNC machined from billet aluminum
- * Sold in pairs
Chrome €353.72 instock
Black €353.72 - Out Off Stock
REMOVABLE PILLION PAD & SADDLEBAGS FOR CUSTOM USE
- * Suction Cup Installation
- * Pillion Pad measures 10" Long x 6" Wide x 1 3/4" Thick
- * Saddlebags measure 7 1/4" Long x 2 1/2" Wide x 8" Tall
High Pitch Horn
€14.30
Belts available for all models
Foam Lever Pads
€6.86
WRIST REST,THROTTLE ASSIST FITS ANY TWIST-GRIP
€13.50
440 IAS SERIES SHOCKS
- TUV approved
- Available for V-ROD, FLT, FLHT, DYNA GLIDE, FXR, XL
- In Black or Chrome
SKULL AIR CLEANER COVER
- * Replacement cover for the standard teardrop cover on S&S E or G series air cleaners
- * Skull motif flows cleanly down the side of the cover for a unique look
- * High-strength composite material construction with a chrome-plated finish
- * Installs quickly and easily with supplied hardware
Black €123.59
A real biker's brew. It is reported that the beans for this coffee are picked by the virgin daughters of Panhead Valdez by the light of a full moon. Not only will this feel right at home in your kitchen, but when the coffee is gone it would look great on your coffee table filled with your favorite cigars. Includes resealable lid. Try it, you'll like it.
Price €16.75
HIGH-INTENSITY DISCHARGE XENON-WHITE® 12 VOLT REPLACEMENT HEADLIGHT BULB FOR ALL MODELS
Unlike halogen bulbs that use a low charge of Bromine gas, this High Intensity Discharge replacement bulb utilizes a high pressure charge of Xenon (zee'-nan) gas. Use of Xenon gas increases the bulb's luminous flux by more than 20% producing a brilliant white quality that is far brighter than the light produced by a halogen bulb of the same wattage. The 100 watt high beam is an absolute necessity on those long stretches of lonesome highway and the 90 watt low beam produces excellent lighting without being offensive to oncoming traffic. The bulb glass is produced with UV colored glass that has a bluish tint, however the light output is Xenon-White®. H4 style double contact Headlight Bulbs can be used as an OE replacement or on all headlights that require a replacement bulb with a P43T base.
Street Glow
100/90 Watt
Fits 5 3/4" and 7" O.D. Headlights
Sold in Pairs
Price €32.58
Each strip measures 9 3/8 long x 1/4" wide x 7/16" tall and includes 24 waterproof LED lights
Encased in a clear flexible material, these strips will contort to almost any surface shape
Includes double sided tape for installation, 5 foot of wire and instructions
Street FX ™ ElectroPods
Various colours available
Price €31.73
V-FACTOR SPINNER GAS CAPS FOR 1982/LATER MODELS
CNC machined from billet aluminum
Vented cap with right hand thread
See below for availability of finishes
Cap measures 3/4" tall (from the gasket surface) and has a 4 1/2" circumference at the spinners
Price €120.90
UNIVERSAL ATTITUDE STICKS
Made from 9/16” round cold- rolled steel
Available with chrome, black powder-coated or raw finish
Fit all models and width sideplates, except Plug-N-Play
Measure 30” tall
Price €165.36
MALTESE CROSS GAS CAPS
Billet aluminum construction, then polished and chrome plated
Vented and non-vented styles available
Fit early and late-model screw-in style tanks
Price €44.45 please state vented and years 82-95 or 96-08
Made from heavy gauge steel, these state of the art heat shields are formed to fit snugly around exhausts from 1 3/4" to 2 1/2" in diameter. Choose between flamed or slotted. Both shields have mounting clamps included. Slotted Universal Heat Shield, 9" Long.
Price €21.70
Available next month - contact us for prices:
|